NUTS AND BOLTS
Elite offer two styles of bolts, both in 11mm or 22mm lengths which are made from aluminium therefore eliminating rust and provide a long life. The full headed series is intended for the construction of most aluminium greenhouses whereas the cropped headed style provides an opportunity of attaching items to the frame once it is assembled.

11mm – Pack size: 15 or 50

22mm – Pack size: 15

DOOR WHEELS
Finger tip door operation is provided by plastic door wheels with self lubricating ball bearings, available in two sizes: 28mm or 32mm (28mm is the most widely used).

Pack size: 2

Includes fixing aid.

PLASTIC HOOKS
Easily secured into the roof these useful hooks can be used to provide a means to attach light weight supports for plant development such as tomato strings. Pack size: 6

LINING HOOKS
Used to attach lining such as bubble plastic or netting to the inside framework. The plug is pushed through the lining material and then twisted and locked into position in the glazing bar.

Pack size: 10

PLASTIC PLUG SPACER
Allows breathability and reduces condensation when used with the lining hooks to create a 1″ air gap between the lining material and the greenhouse glass.

Pack size: 6

EYES
Easily secured into the roof. These circular eyes provide a means to attach light weight supports for plant development such as tomato strings.

Pack size: 6

WIRE CLIPS
Finished in stainless steel, the butterfly shaped wire clip attaches to the side of the glass ensuring a tight, flush fit against the glazing bar.

Pack size: 15 or 50

SPRING CLIPS
These rust-free stainless steel clips hold the glass firmly against the glazing bar.

Pack size: 15 or 50

PRE FORMED OVERLAP CLIPS
A stainless steel overlap clip with pre-formed top and bottom allowing the glass to overlap by 3/8″.

Pack size: 15

OVERLAP CLIPS
For ease of installation of overlapping glass, this aluminium clip has the flexibility of allowing for glass tolerance as it is only preformed at one end therefore allowing for adjustment by hand during the greenhouse glazing process.

Pack size: 15 or 50

WALL STRAIGHTNERS
These useful spacers are available in thicknesses from 1mm to 5mm and are used when the aluminium frame and the floor or wall that it adjoins is not compatible.

Can be used with silicone.

REPAIR PACK
A selection of parts often required for repairing damaged sections, or spares for misplaced items.

Pack contents:

x6 Full Headed Bolts (11mm) x6 Cropped Headed Bolts (11mm) x12 Nuts x6 Wire Clips x6 Spring Clips x6 Overlap Clips

BAR CAPPING
Removes the need for clips as the capping is attached to the glazing bars with stainless steel screws to hold the sheets firmly onto the frame.

Available in black, white or green.

BRICK BASE ANCHORING KIT
If you have built a brick base our anchoring kit, which consists of 10 aluminium angles, plastic plugs and stainless steel screws, is a useful acquisition. The aluminium angles are bolted to the cill and then with the use of the plug and screws, are secured to the brickwork.

Can be powder coated

NUT CAPS
For a more professional finish, these nut covers are used in conjunction with the powder coated products and effectively hide the bolt heads. Available in black, white or green.

Pack size 50

CANTILEVERS
Additional strength to your greenhouse framework can be provided by the Aluminium T bar which is available in 12″, 24″ or 36″ lengths and used as eave or ridge bracing.

Can be powder coated

LONG ANGLE BRACKETS
Aluminium unequal angle brackets can be used for a variety of things such as training a wire for growing tall crops or as an anchor bracket for brick or aluminium base.

Pack size 10

Can be powder coated

BASE LEGS
Aluminium base legs bolt to the base corners and therefore make it possible to anchor the greenhouse to the ground.

Can also be used as angle sections.

Pack size 4

Can be powder coated

SILICONE SEALANT
Available in black, white, grey or clear and ideal for emergency repairs, the sealant can be applied to wet and dry surfaces and bonds to aluminium, metal, steel, most plastics, timber, tile and brick and lasts up to 25 years and requires a gun dispenser which is sold separately.

MUNTINS and GLASS SPACERS
These PVC strips allow one pane of glass to sit on top of another without an overlap. Particularly suitable for use with full sheet toughened glass.

Available in black, white or green.

NEOPRENE
This glazing gasket is PVC based and has a life span in excess of 15 years. Available in black or grey, it must be pre-threaded into the glazing bars prior to assembly.

This is specially designed to fit all Elite Greenhouses and can not be guaranteed on any other make.

Available in 50′ or 100′ coils.

DOOR LOCKS
Aluminium bracket attached to the framework includes a padlock and key.

Available for single or double door greenhouses.

Door lock brackets can be powder coated. Can be powder coated

DRAUGHT EXCLUDER
A black offset T section which slides into the back of the door to fill any space between the door and frame which can also double up as a door stop.

MASTIC
A butyl mastic beading strip (grey) forms a gasket between the glass and the frame of the greenhouse. This 6mm thick pliable beading can be effectively used to replace other perished rubber gaskets and is hard wearing, very versatile and suitable for most makers of greenhouses. Available in 20′, 150′ or 200′ coils.

SOIL BED DIVIDER
The Soil Bed Divider allows you to replicate an outdoor soil bed situation, inside your greenhouse, while at the same time controlling the amount of water and temperature its contents are exposed to.

The divider is fixed to the Elite built in base section around the perimeter of the greenhouse, and because it is fixed to continuous bolt channels, you can easily alter the bed width to suit your requirements. The divider is 100mm tall and made of strong aluminium extrusion that can also be powder coated to suit your greenhouse colour. Suitable for Elite Greenhouses with built in aluminium bases, the bed divider fits inside greenhouses installed onto both hard or soft standing. Can be powder coated

FLY SCREEN NET
The Elite Fly Screen Net allows you to leave your greenhouse door(s) open for ventilation while at the same time helping keep out unwanted pests.

Available in 3 widths to suit 2′, 3′ and 4′ wide door openings with a drop height of 2050 mm, and is fitted with heavy duty double zippers on both sides.

The fabric is PVC coated that is weather-proof even when rolled wet, tear proof and has a resistance to mildew. Installation is simple and can be completed in around 10 minutes to any Elite Greenhouse, and when the screen is not required it neatly rolls up in seconds.

– Accessories Pricing –

GREENHOUSE LINKS

– Greenhouses Index –

– Customer Greenhouse Gallery –

– Greenhouse Slideshows –

– Customer Greenhouse Comments –